FLASHING METHODS

READ FIRST BEFORE FLASHING YOUR TABLET



Only Flash your Tablet if you did not enabled USB Debugging if your problem is BootLoop. Flashing your Tablet with a different Firmware has a probability of disabling your Touchscreen, Wifi, G-Sensor, Camera etc. This is because of Firmwares have different Drivers for the tablet which causes "incompatibility".

However, you can always reflash with a different firmware until you find that works everything on your Tablet.

If you had enabled USB Debugging and want to try flashing, always backup your Dump Rom first. This will revert your Tablet with it's Original Stock Rom if you did not flash yet.

CHOOSE A FLASHING METHOD THAT CORRESPONDS TO YOUR TABLET'S SPECIFICATIONS

Flash Tablet via Micro SD Card with PhoenixCard

8 comments:

  1. can you help me pls.my tab is royqueen bootloop,when i try to go in recovery mode it doesnt continue instead it reboot again and hang.when i try to flash using live suit it doesn't recognized even i install the driver. when itry install recovery it said pemission denied, i cant enable usb debbuging because its already bootloop all the tools i use it came into fails.why can i do.pls help

    ReplyDelete
  2. In Lenovo A1020-t What firmware do I use?

    ReplyDelete
  3. Can you help me with my ZH&K tab z9000 too many pattern attempt. It is not detected by pc, I have downloaded so many drivers it is installed but it won't appear in the Device Manager. Kindly help, Thanx

    ReplyDelete
  4. i have acer iconia a500 tab i already tried everything except flashing it.. what is the best method for iconia a500 for flashing... thanx

    ReplyDelete
  5. man i have a hp slate 7 voice tab please tell me wht firmware is the best one. asap man

    ReplyDelete
  6. man i have a hp slate 7 voice tab please tell me wht firmware is the best one. asap man

    ReplyDelete
  7. What frimware can be used for karbonn st10

    ReplyDelete
  8. What frimware can be used for karbonn st10

    ReplyDelete