ROOT YOUR CHINA TABLET WITH UROOT VIA RECOVERY MODE!

1. Download uRoot here
2. Connect your Tablet to your computer.
3. Paste the uRoot file to your Tablet.

Note: Do not extract the file and don't put it inside a folder)

4. On your tablet, go to Setting > Backup and Reset > Recovery Mode.

5. Just click okay then your tablet will reboot.
6. Now download rootchecker on google playstore.
7. Verify Root Access.
8. Congratulations! Your device has root access!

FLASH YOUR MYVIEW / MOVE TABLET USING YOUR MICRO SD CARD!

1. Download your Firmware here.
2. Extract files then Open the folder
3. Copy all files then paste to 1gb or 2gb micro sd card
4. Turn off your tablet then insert micro sd card
5. Turn it on then wait until finished flashing

TUTORIAL IS UNDER CONSTRUCTION

Under Cons

MYVIEW / MOVE FIRMWARES

Please choose only the firmware that corresponds to your Tablet's Model.

MA700 ICS 4.0
MA700DX Jellybean 4.2
MA701QX Jellybean 4.2
MA705 ICS 4.0
MA710 ICS 4.0
MA715 Jellybean 4.1
MA900 ICS 4.0

For the Flashing procedure, click here.

ROCKCHIP FIRMWARE / ROM COMPILATION

POLAROID

TOUCHMATE

OTHER ROCKCHIP BRANDS

0 00 B INTERNAL STORAGE FIX (NEW)

So... the first method didn't work eh? Let's try the much complicated fix method. On this Tutorial you will need a Micro SD card.

1. Download All of the required files:

Android SDK

SuperSU

Terminal Emu

BusyBox

2. Extract Android SDK to your pc then open SDK Manager
3. You will now need to Install the following on SDK Manager:

Android SDK Tools

Android SDK Platform Tools

Android SDK Build Tools

Android SDK Build Tools

4. Insert your Micro SD card to your tablet then connect the tablet to your PC. You should enable USB Debugging as well.

5. Paste the files: SuperSU, BusyBox and Terminal Emulator to your Tablet's other Internal Storage (NAND Flash). Do not paste it to your SD Card!

6. Now open SDK folder then open platform tools folder.

7. Inside the folder, point your mouse pointer to a blank area then Press CTRL + Shift + Right Click then select Open Command Window here. 

8. Command Prompt will appear. Inside the CMD, type these commands:

adb devices (press enter)

adb shell pm set-install-location 2 (press enter)

adb shell pm get-install-location (press enter)

9. Remove tablet from PC then install SuperSU, BusyBox and Terminal Emulator. You can now install them because we changed the path of installation on the CMD.

10. Enable your Tablet's Wifi and connect it.

11. Open Busybox, press Continue and Grant. 

12. Scroll down then click Install.Wait for busybox to be installed

13. Open SuperSU then Install the binary files. 

14. Reboot your Tablet and it will be factory reset. Go back and do Step 4 to Step 8

15. Open Terminal Emulator, Grant, then type these codes:

su (press enter on tablet)

busybox cp /system/xbin/busybox /system/bin (press enter on tablet)

0.00 B INTERNAL STORAGE FIX TUTORIAL

Can't Install Android Applications or take pictures because of 0 Internal Storage Capacity? Rooted and this problem occured?

Don't throw your tablet yet! This TUTORIAL will help you fix your Tablet in no time!

1. Download Root Explorer by clicking here

Note: Do not download it from google playstore because it will not allow you to install the file. 

2. Connect your Tablet to your PC via mass storage, then paste the file to your File Manager.

3. Install Root Explorer

4. Go to directory system/xbin 

5. Copy the file "busybox"

6. Go up once then paste to system/bin

7. Restart the Tablet

See the magic!

If the above method does not work in cases you still can't install root explorer or can't find busy box, try this new method.

FIRMWARE / ROM / IMG COMPILATION

A10, A13, ALLWINNER

ROCKCHIP

MYVIEW / MOVE

IVIEW

  You can request your Model's Firmware at the comment section below. 

Give as much information of your Tablet so I can search for the correct Firmware such as Model, Model Number, Build Number, Microprocessor, Manufacturer etc.

READ FIRST BEFORE FLASHING YOUR TABLET

Only Flash your Tablet if you did not enabled USB Debugging if your problem is BootLoop. Flashing your Tablet with a different Firmware has a probability of disabling your Touchscreen, Wifi, G-Sensor, Camera etc. This is because of Firmwares have different Drivers for the tablet which causes "incompatibility".

However, you can always reflash with a different firmware until you find that works everything on your Tablet.

If you had enabled USB Debugging and want to try flashing, always backup your Dump Rom first. This will revert your Tablet with it's Original Stock Rom if you did not flash yet.

CHOOSE A FLASHING METHOD THAT CORRESPONDS TO YOUR TABLET'S SPECIFICATIONS

Flash A10, A13, All Winner Tablet with LiveSuit

Flash Rockchip Tablet with Rockchip Batch Tool

Flash Tablet via Micro SD Card with PhoenixCard

under cons

editing

ANDROID STUCK AT LOGO AND BOOT LOOP FIX!

If you are new to this kind of issue and new to fixing Tablets, try first the oldest trick: "Recovery Mode"

If Recovery Mode does not work on your tablet, try to remember if you enabled "USB Debugging" on your tablet before the problem occurred.

If you enabled USB Debugging before the problem persists, use these fix methods:

Wipe Rom Easy

Android Multi Tools

If you did not enable Usb Debugging on your tablet but have FastBoot installed, you can still use Android Multi Tools.

However if you did not meet any of those requirements, you must now try flashing your Tablet. For Flashing Tutorials, click here.

FLASH YOUR ROCKCHIP TABLET LIKE POLAROID, TOUCHMATE USING ROCKCHIP BATCH TOOL!

Again before Flashing make sure you have tried other alternatives such as Recovery Mode and RK29XX Wipe All. Before flashing, backup your Dump Rom First if your Tablet's USB Debugging is Enabled.

Step by Step Rockchip Tablet Flashing Tutorial

1. Charge your Tablet. It must be full charged or not Low Battery.

2. Download your Firmware / Rom corresponding to your Tablet's Model at the Rockchip Rom Section.

3. Download Rockchip Batch Tool (with drivers) by clicking here

4. Extract Files to any destination folder (ex. desktop)

4. Open Device Manager. Choose one to access Device Manager

a. Press Winkey, type Device Manager then click Device Manager

b. Press Winkey, right click my computer, properties then click Device Manager.

c. Press Winkey + R then type devmgmt.msc then press enter

5. Turn off Tablet and connect it to PC, Device Manager should look like this if the driver is not installed.

6. Right click Unknown Device, select update driver software and locate the drivers on the Rockchip Folder we extracted. Make sure you browse the proper driver according to your OS.

Press Ok then press Next. Let it install.

7. Now open RKBatchTool at the Rockchip Batch Tool folder.

This will be displayed:

8. Now reconnect your tablet then turn it to flash mode by holding volume up + power button. Connected Devices 1 will turn green.

9. Click the browse button on the upper left (...) select the Firmware / Rom img file you downloaded then click open.

10. Click upgrade then wait until flashing is finished.

Warning: Do not turn off your computer or disconnect the cable while it is flashing!

When tablet automatically boots, flashing is finished. 

You can now use your Tablet!

FIX BOOTLOOP, PATTERN LOCK AND GMAIL LOCK USING RK29XX WIPE ALL!

This will only work in Rockchip Tablets (RK29XX) and if the Tablet's USB Debugging is enabled.

(will be updated for testing)

ALL WINNER ROM SECTION DOWNLOAD LINKS. 

Extract files with winrar or any extracting tool after download

NikkoJames' Firmware List <-- You must log in to view links here
TechKnow Forum Rom Compilations <-- You must log in to view links here
MoonFruit Rom List <-- No need to log in
4shared Roms <--  You can search files here but you must log in to download files
GSM Rom<-- No need to log in
FileCrop<-- No need to log in and you can also search files

OTHER ALL WINNER FIRMWARES (SPECIFIED)

For Single Cam Only, 7 inches tablet
MaPan_MX713_Firmware_P20121112
MX713_Firmware_HG20121030Left
Softwinerevb_nuclear_evb-eng_411_jro03c_201
Q88_nuclear_evb-eng 4.0.4 IMM76D 20120917

For Dual Cam Only, 7 inches tablet
MaPan_MX713_DC_Jelly_Bean_4.2.2
MX713 DC Firmware HG20121112Left
MaPan_MX713_DC_Jelly_Bean_OS_Firmware_20130618


For Dual Cam Only, 9 inches tablet
MAPAN_MX913_DC_Firmware_20130108.rar

FLASH YOUR A10 A13 ALLWINNER TABLET USING LIVESUIT!

Before Flashing, make sure you have tried the other alternatives first such as Recovery Mode, Wipe Rom Easy and Android Multi Tools. This method is only advisable if all other alternatives didn't work. Such as your USB debugging is not enabled.

Step by Step AllWinner Tablet Flashing Tutorial

1. Charge your Tablet. It must be full charged or not Low Battery.

2. Download your Firmware / Rom corresponding to your Tablet's Model at the AllWinner Rom Section.

3. Download Livesuit 1.11 by clicking here

4. Extract Zip file to your desired location (ex. Desktop)

5. Open LiveSuitPack_1.11.exe from Livesuit Folder

6. Wait for it to self extract then run Livesuit.exe as Admin

7. A pop up will appear asking if you want a guide for a upgrading. Select NO since you're using my guide.

8. Click Select Img then browse for your downloaded ROM / Firmware .img file. Open.

9. Turn off your Tablet then ready your connector.

10. Hold Volume Up button, connect the tablet to your computer then press power button multiple times slowly.

11. Pop up will appear on Livesuit asking if you want mandatory format, just click yes and yes again.

12. Wait until a pop up says "upgrade succeeds" 

Warning: Do not turn off your computer or disconnect the cable while it is flashing!

When tablet automatically boots, flashing is finished. 

You can now use your Tablet! If it does not boot, hold the power button to turn it on.

FIX BOOTLOOP, PATTERN LOCK, GMAIL LOCK USING ANDROID MULTI TOOLS!

Like Wipe Rom Easy, your tablet must be USB debugging enabled as well.

But for pros, this program can search for your drivers and has many options even with fastboot.

This will fix Boot Loops, Pattern Lock, Gmail Lock with either Usb Debugging enabled or fastboot.

1. Download Android Multi Tools here and ADB driver Installer
2. Connect your tablet then Install Drivers.
3. Now Extract Android Multi Tools to your desired location such as Desktop, My Documents or D: Drive

4. Run Android Multi Tools as admin(right click, run as admin)
5. Press 1 then press enter to detect the tablet.
6a. If tablet is detected, choose a number pertaining to your Tablet's problem. For bootloops, we select 5 then press enter

6b. If you did not enabled Usb Debugging but have Fastboot installed on your tablet, select 7 first, then select 8.


7. Your tablet will reboot and it will be now fixed!

If this method does not work on your Tablet, try Wipe Rom Easy or SRS Tools.

WIPE ROM EASY FOR BOOTLOOPS, PATTERN LOCK, AND GMAIL LOCK!

This will only work if USB Debugging is enabled on your tablet.

1. Download Wipe Rom Easy here
2. Extract files to your favorite destination folder (ex. Desktop, My Documents or Drive D)
3. Open Android Wipe Rom Easy
4. A cmd prompt will appear. Press any key to continue
5. Now connect your tablet to your computer via usb connector
6. Device Manager will pop up, right click Unknown Device then select Update driver
7. Click browse then locate the A10 A13 Folder on wipe rom easy folder
8. Wait until it installs. Install (recommended)
9. Close device manager and wait until it reboots your tablet
10. You can now use your tablet!

RECOVERY MODE YOUR TABLET TO FIX BOOTLOOP, PATTERN LOCK, AND GMAIL LOCK!

Before you flash or do anything stupid to your tablet, try doing a "Recovery Mode" first.

This has a chance of fixing the boot loop or stuck at android logo. I recommend this before doing a Flash because flashing a wrong firmware can be very depressing.

Here are the Steps:

1. Turn off your tablet
2. Try a button combination that will work:

a. Hold Volume Up + Power Button
b. Hold Volume Up + Power Button + Back Button
c. Hold Back Button + Power Button
d. Hold Menu Button + Power Button

If none of them work, try any other combinations such as holding all button or add the Volume Down button.

To find out if it succeeds, a wild android image will appear:

Now try to press the power button or the volume button once and see if an option will appear:

If this settings or option does not appear, just wait until your tablet reboot by itself.

But if it does appear, select the "wipe data / factory reset" by pressing volume up or volume down to go up and down until  "wipe data / factory reset" is selected then press power button to confirm.

Your tablet will now reboot and there is a chance that it will be fixed!

READ FIRST BEFORE YOU CONTINUE

I am not hereby responsible if you completely brick your tablets from different attempts. But I assure that you will have no problems if you follow the instructions perfectly.

Most cheap and china tablet users had encountered different problems on their tablet such as BootLoop, Cant install apps, no memory storage, no wifi, no touchscreen, no g-sensor, no camera and many more.

I made this blog for different tutorials on how to fix your bricked or unusable tablet.

CONTENTS

Checking your Tablet's Specs, Model or Microprocessor

Android Stuck at Logo / Boot Loop Fix

Backing up dump ROM before Flashing

Different Flashing Methods to your Tablet

ROM Firmware Compilation (Request Firmware / ROMs here)

0.00 KB Internal Storage Fix

Touchscreen won't work! / Inverted Touchscreen