0.00 B INTERNAL STORAGE FIX TUTORIAL

Can't Install Android Applications or take pictures because of 0 Internal Storage Capacity? Rooted and this problem occured?

Don't throw your tablet yet! This TUTORIAL will help you fix your Tablet in no time!

1. Download Root Explorer by clicking here

Note: Do not download it from google playstore because it will not allow you to install the file. 

2. Connect your Tablet to your PC via mass storage, then paste the file to your File Manager.

3. Install Root Explorer

4. Go to directory system/xbin 

5. Copy the file "busybox"

6. Go up once then paste to system/bin

7. Restart the Tablet

See the magic!

If the above method does not work in cases you still can't install root explorer or can't find busy box, try this new method.

FIRMWARE / ROM / IMG COMPILATION

A10, A13, ALLWINNER

ROCKCHIP

MYVIEW / MOVE

IVIEW

  You can request your Model's Firmware at the comment section below. 

Give as much information of your Tablet so I can search for the correct Firmware such as Model, Model Number, Build Number, Microprocessor, Manufacturer etc.

READ FIRST BEFORE FLASHING YOUR TABLET

Only Flash your Tablet if you did not enabled USB Debugging if your problem is BootLoop. Flashing your Tablet with a different Firmware has a probability of disabling your Touchscreen, Wifi, G-Sensor, Camera etc. This is because of Firmwares have different Drivers for the tablet which causes "incompatibility".

However, you can always reflash with a different firmware until you find that works everything on your Tablet.

If you had enabled USB Debugging and want to try flashing, always backup your Dump Rom first. This will revert your Tablet with it's Original Stock Rom if you did not flash yet.

CHOOSE A FLASHING METHOD THAT CORRESPONDS TO YOUR TABLET'S SPECIFICATIONS

Flash A10, A13, All Winner Tablet with LiveSuit

Flash Rockchip Tablet with Rockchip Batch Tool

Flash Tablet via Micro SD Card with PhoenixCard

under cons

editing

ANDROID STUCK AT LOGO AND BOOT LOOP FIX!

If you are new to this kind of issue and new to fixing Tablets, try first the oldest trick: "Recovery Mode"

If Recovery Mode does not work on your tablet, try to remember if you enabled "USB Debugging" on your tablet before the problem occurred.

If you enabled USB Debugging before the problem persists, use these fix methods:

Wipe Rom Easy

Android Multi Tools

If you did not enable Usb Debugging on your tablet but have FastBoot installed, you can still use Android Multi Tools.

However if you did not meet any of those requirements, you must now try flashing your Tablet. For Flashing Tutorials, click here.

FLASH YOUR ROCKCHIP TABLET LIKE POLAROID, TOUCHMATE USING ROCKCHIP BATCH TOOL!

Again before Flashing make sure you have tried other alternatives such as Recovery Mode and RK29XX Wipe All. Before flashing, backup your Dump Rom First if your Tablet's USB Debugging is Enabled.

Step by Step Rockchip Tablet Flashing Tutorial

1. Charge your Tablet. It must be full charged or not Low Battery.

2. Download your Firmware / Rom corresponding to your Tablet's Model at the Rockchip Rom Section.

3. Download Rockchip Batch Tool (with drivers) by clicking here

4. Extract Files to any destination folder (ex. desktop)

4. Open Device Manager. Choose one to access Device Manager

a. Press Winkey, type Device Manager then click Device Manager

b. Press Winkey, right click my computer, properties then click Device Manager.

c. Press Winkey + R then type devmgmt.msc then press enter

5. Turn off Tablet and connect it to PC, Device Manager should look like this if the driver is not installed.

6. Right click Unknown Device, select update driver software and locate the drivers on the Rockchip Folder we extracted. Make sure you browse the proper driver according to your OS.

Press Ok then press Next. Let it install.

7. Now open RKBatchTool at the Rockchip Batch Tool folder.

This will be displayed:

8. Now reconnect your tablet then turn it to flash mode by holding volume up + power button. Connected Devices 1 will turn green.

9. Click the browse button on the upper left (...) select the Firmware / Rom img file you downloaded then click open.

10. Click upgrade then wait until flashing is finished.

Warning: Do not turn off your computer or disconnect the cable while it is flashing!

When tablet automatically boots, flashing is finished. 

You can now use your Tablet!