ROOT YOUR CHINA TABLET WITH UROOT VIA RECOVERY MODE!

1. Download uRoot here
2. Connect your Tablet to your computer.
3. Paste the uRoot file to your Tablet.

Note: Do not extract the file and don't put it inside a folder)

4. On your tablet, go to Setting > Backup and Reset > Recovery Mode.

5. Just click okay then your tablet will reboot.
6. Now download rootchecker on google playstore.
7. Verify Root Access.
8. Congratulations! Your device has root access!

FLASH YOUR MYVIEW / MOVE TABLET USING YOUR MICRO SD CARD!

1. Download your Firmware here.
2. Extract files then Open the folder
3. Copy all files then paste to 1gb or 2gb micro sd card
4. Turn off your tablet then insert micro sd card
5. Turn it on then wait until finished flashing

TUTORIAL IS UNDER CONSTRUCTION

Under Cons

MYVIEW / MOVE FIRMWARES

Please choose only the firmware that corresponds to your Tablet's Model.

MA700 ICS 4.0
MA700DX Jellybean 4.2
MA701QX Jellybean 4.2
MA705 ICS 4.0
MA710 ICS 4.0
MA715 Jellybean 4.1
MA900 ICS 4.0

For the Flashing procedure, click here.

ROCKCHIP FIRMWARE / ROM COMPILATION

POLAROID

TOUCHMATE

OTHER ROCKCHIP BRANDS

0 00 B INTERNAL STORAGE FIX (NEW)

So... the first method didn't work eh? Let's try the much complicated fix method. On this Tutorial you will need a Micro SD card.

1. Download All of the required files:

Android SDK

SuperSU

Terminal Emu

BusyBox

2. Extract Android SDK to your pc then open SDK Manager
3. You will now need to Install the following on SDK Manager:

Android SDK Tools

Android SDK Platform Tools

Android SDK Build Tools

Android SDK Build Tools

4. Insert your Micro SD card to your tablet then connect the tablet to your PC. You should enable USB Debugging as well.

5. Paste the files: SuperSU, BusyBox and Terminal Emulator to your Tablet's other Internal Storage (NAND Flash). Do not paste it to your SD Card!

6. Now open SDK folder then open platform tools folder.

7. Inside the folder, point your mouse pointer to a blank area then Press CTRL + Shift + Right Click then select Open Command Window here. 

8. Command Prompt will appear. Inside the CMD, type these commands:

adb devices (press enter)

adb shell pm set-install-location 2 (press enter)

adb shell pm get-install-location (press enter)

9. Remove tablet from PC then install SuperSU, BusyBox and Terminal Emulator. You can now install them because we changed the path of installation on the CMD.

10. Enable your Tablet's Wifi and connect it.

11. Open Busybox, press Continue and Grant. 

12. Scroll down then click Install.Wait for busybox to be installed

13. Open SuperSU then Install the binary files. 

14. Reboot your Tablet and it will be factory reset. Go back and do Step 4 to Step 8

15. Open Terminal Emulator, Grant, then type these codes:

su (press enter on tablet)

busybox cp /system/xbin/busybox /system/bin (press enter on tablet)